Ignition/Water Pump Drive Parts |
Fitting Info'/Pdf |
Part Number |
Pre Production Price |
Price |
Ignition Case. Type 1.
|
In Stock. |
1131 XR1105 |
N/A |
£200.00 |
Ignition Case. Type 2.
|
In Stock. |
1131 XR1103 |
N/A |
£200.00 |
Ignition Cover. Also the same as Early RG500's
 
|
3 x M5 x 16mm Screws.
In Stock. |
11324 XR1103 |
|
£85.00 |
Rubber Grommet Only.   |
In Stock. |
13116 XR1104 |
N/A |
£26.00 |
Ignition Case (Type 1), Cover and Rubber Grommet Kit.
 
|
In Stock. |
1131 XR1105 11324 XR1103 13116 XR1104 |
N/A |
£310.00 |
Ignition Case (Type 2), Cover and Rubber Grommet Kit.
 
|
In Stock. |
1131 XR1103 11324 XR1103 13116 XR1104 |
N/A |
£310.00 |
Water Pump and Rev Counter Crank Gear (Requires tapered Sleeve to fit GT Crank).Will fit directly onto TR Crank.  |
2 Weeks Lead. |
1129 XR1103 |
£110.00 |
£120.00 |
Water Pump Shaft Gear (Shaft not supplied Requires Pressing onto GT/TR standard Shaft)   |
2 Weeks Lead. |
1130 XR1103 |
£95.00 |
£105.00 |
Tapered Sleeve for GT Crank. |
Rotor Brg Carrier Ig |
bdk01 XR1112 |
£35.00 |
£40.00 |
Bearing For Ignition Case |
|
|
N/A |
£8.08 |
Seal for Ignition Case |
|
|
N/A |
£5.04 |
Gears and Sleeve Kit (includes Bearing, seal and keys) |
2 Weeks Lead. |
|
£225.00 |
£260.00 |
Gears and Sleeve Kit. |
2 Weeks Lead. |
|
£215.00 |
£250.00 |
Ignition Case Kit. Everyting less programable ignition.
|
|
|
|
|
Keys for Sleeve. (Each, 2 required). |
|
|
£1.20 |
£1.20 |
Ignition Rotor. |
2 Weeks Lead. |
|
£55.00 |
£65.00 |
Pick Up Plate, with pick up coils and wiring. |
2 Weeks Lead. |
|
£70.00 |
£80.00 |
Ignition System, with Coils, Leads, Caps, pick up plate, pickups, rotor, hand held programmer. Runs from 12v supply. |
|
|
£623.40 |
£643.40 |
Complete Ignition Kit. Everything needed, inc casing, gears, Ig system etc. |
|
|
|
|
Other Parts |
Fitting Info' |
Part Number |
Pre Production Price |
Price |
TR 750 Top Water Manifold (With 'O' Ring )
    |
Includes 1mm section O Ring, can also use std gasket. If using O ring, head face must be good. |
11371 XR1103 |
In Stock. |
£68.00 |
TR 750 Throttle Assy's
.jpg)
|
Includes, Cable adjusters, Alloy Bolts and Suzuki R+L Grips. |
Top 11348 XR1105 Btm 11358 XR1105 Tube 11368XR1105 |
In Stock. |
£280.00 |
RG 500 Throttle Assy's
.jpg) .jpg)  .jpg) |
Includes, Cable adjusters, Alloy Bolts and Suzuki R+L Grips. |
Top 57126 42000 Btm 57131 42000 Tube 57130 42000 |
In Stock. |
£280.00 |
TR750 Water Pump Cover, these are deeper for a taller impeller.
 
|
4/6 weeks Lead |
17411 XR1100 |
£55.00 |
£75.00 |
TR750 Clutch Top Pressure Plate.
  
|
4/6 weeks Lead |
|
£80.00 |
£110.00 |
TR750 Titanium Clutch Nuts Set of 8. (Back of outer Basket to Drive Plate)
|
In Stock |
|
£22.00 |
£30.00 |
TR750 Clutch Outer Basket, 7075T6 Hard Anodised in Black.
|
Tooth Profile In Process.
2 weeks Lead. |
|
£275.00
£450.00 Both |
£300.00
£500.00 Both |
TR750 Clutch Inner Basket, 7075T6 Hard Anodised in Black. The first and second pictures are both Inner and Outer part machined.
  
|
Tooth Profile In Process.
2 weeks Lead. |
|
£275.00
£450.00 Both |
£300.00
£500.00 Both |
TR750 Clutch Drive Plate.
 
|
In Production 3/4 weeks Lead. |
|
£215.00 |
£240.00 |
TR750 Primary Drive Gear for Dry Clutch 84T (Clutch Gear)
 
|
In Production 3/4 weeks Lead. |
|
£250.00 |
£280.00 |
TR750 Primary Drive Gear for Dry Clutch 54T (Crank Gear)
 
|
In Production 3/4 weeks Lead. |
|
£175.00 |
£220.00 |
TR750 Primary Dry Clutch Inner Cover.
 ![Generator]()
|
Pattern Still In Production 3/4 weeks Lead for pattern. |
|
£380.00 |
£460.00 |
TR750 52mm Titanium Cylinder Bolts Each. (4 Required)
|
In Production 3/4 weeks Lead. |
|
£30.00 |
£38.00 |
TR750 40mm Titanium Cylinder Bolts Each. (4 Required)
|
In Production 3/4 weeks Lead. |
|
£28.00 |
£36.00 |
TR750 Aluminum Head Bolts Set 11. 7075T6 Hard Anodised in Black
|
In Production 3/4 weeks Lead. |
|
£40.00 |
£62.00 |
TR750 10mm Titanium Cylinder Studs Set (12 Pcs), Including short base stud.
   
|
In Stock |
11389 XR1102 |
|
£140.00 |
TR 750 Front Disc Carrier, First 2 Pictures are our solid Models, second 2 are the originals with welded spar.
    |
Pattern In Production, Castings in 4/6 weeks |
11313 XR1103 |
£75.00 |
£96.00 |
About Pre production Price.
This is the price we will sell the parts for before we have them ready for sale. These are parts we have already had a few samples of, and have machined, checked and tested suitability. We are offering the oportunity to buy these parts at a reduced price to help us finance the next patterns and tooling for further parts. The idea is to help everybody, you get the parts at reduced price and this also enables to get on with further development. There will obviously be a delay of 6/8 weeks, however we will try to keep people informed on this page when we have approximate dates for completion of these parts.
Note, the Pre Production Price only applies to those that pay for the parts before they are finished. When they are in stock the price will be at the higher level.
About Us
BDK was established in 1987. Over the past 20++ years we have been involved with many interesting projects and have built up a good reputation in many forms of motorsport. Our main forte is motorcycle engineering but we also build race engines for Speedboats and have turned our hand to many a fascinating project over the years whether it be motorcycle or not.
Started European Classic Racing about 5 years ago, with much success. See "The Team and Our Projects" page for more info.
Services
Amonsgt all the specialist services, parts and jobs listed around the website below is a selection of other services we supply. Please contact Sam for more info.
- Reboring
- Engine rebuilds (2 and 4 stroke)
- Crankshaft Rebuilds (2 stroke)
- Carbon Fibre parts
- Custom machining with in house services including CNC mill/CADCAM facilities
- All forms of welding, titianium, stainless, aluminium etc
- Valve seat/guide replacement/manufacture
- Race Preparation
- Tuning 2 and 4 stroke
- 33bhp Restriction kits custom made, fitted and certificate supplied
- Quad bike restriction and certificate for road use purposes
- Spare parts aftermarket and genuine
- A good cup of tea!
|
